Ball joints Champion

Auto Parts Series Champion | Auto parts manufacturer TREK

author
1 minute, 39 seconds Read

Auto parts of the Champion series from TREK: wholesale and retail. For urban driving with increased mileage

Without a keyword

Ball joints Champion

Series auto parts Champion designed for those who like driving in urban conditions with increased mileage values. The use in the production of the Champion series of design solutions that significantly increase the life of the product, increase the safety of the car, even with maximum loads on the suspension. To confirm the design parameters, workmanship and performance of the Champion, a set of bench and road tests was carried out.

The “Champion” TREK series includes ball joints, suspension arms, stabilizer links, steering tips and CV joints.

Ball joints Champion

Ball joints Champion are own development of the TREK company. The design and method of its assembly are patented, and a “Utility Model Certificate” has been obtained for the protective case.

Design features:

  • The use of a one-piece forged body eliminates the possibility of its deformation and the appearance of fatigue cracks, unlike a body made of thin-sheet forged parts.
  • The assembly of the ball joint is carried out by plastic deformation of the upper part of the housing. As a result, high values ​​of pull-out force of the ball pin from the housing are achieved (2 times higher than the standard), high safety during operation is ensured.
  • Sealing rings of a protective cover provide full tightness of knot.
  • The material of the protective cover series Champion provides strength 3-4 times higher than that of rubber, while maintaining elasticity.
  • Operable at temperatures from -65°С to +110°С.
  • The coating of the case provides protection of the product against corrosion during operation.
  • Lubricant ShRB-4 is already placed under the protective cover of the product in the required amount, so there is no need for additional lubrication.
  • The actual mileage reaches 100,000 km.

Ball joints Track of the Champion series are recommended for VAZ cars of the model range from VAZ 2101 to VAZ 2115, Lada Kalina and Lada Priora, Lada 4 * 4 (VAZ 2121), Chevrolet Niva, for GAZ 3110 and its modifications.

Similar Posts